Frame Relay Installation

	Frame Relay Installation

	Above is a diagram of the connection of the K2 to the frame relay interface. The terminal server is connected to the RS-232 output of the K2. The terminal server is connected with a Cat V ethernet cable to the router 10/100 base t port. The internal CSU/DSU of the router is connected to the 4 wire Frame Relay circuit. The commands needed and command options are provided below. Commands followed by [local] are options which must be provided by end user.
	Lantronix MSS-100 Terminal Server Setup Local_1>set priv Password>system Local_1>> change ipaddress [local] Local_1>> change gateway [local] Local_1>> change subnet mask 255.255.255.0 Local_1>> change privpass [local] Local_1>> change name "[local]" {station id recommended} Local_1>> change autobaud disabled Local_1>> change bootp disabled Local_1>> change dhcp disabled Local_1>> change domain [local] {optional} Local_1>> change dsrlogout enabled Local_1>> change flow control ctsrts Local_1>> change inactive logout enabled Local_1>> change inactive timer 10 Local_1>> change netware disabled Local_1>> change access remote Local_1>> change rarp disabled Local_1>> change speed 19200	Cisco 1602 W/internal CSU/DSU Router Setup 1600> enable 1600# config 1600(config)# no service pad 1600(config)# service timestamps debug datetime msec 1600(config)# service timestamps log datetime msec 1600(config)# service password-encryption 1600(config)# hostname router[local] router(config)# no logging console router(config)# enable secret [local] router(config)# ip subnet-zero router(config)# no ip domain-lookup router(config)# interface Ethernet0 router(config-if)# ip address 155.99.28.25 255.255.255.248 [local] router(config-if)# no ip directed-broadcast router(config)# interface Serial0 router(config-if)# no ip address router(config-if)# no ip directed-broadcast router(config-if)# encapsulation frame-relay router(config-if)# service-module 56k clock source line router(config-if)# service-module 56k network-type dds router(config-if)# frame-relay lmi-type ansi router(config-if)# interface Serial0.1 multipoint router(config-if)# description F/R - 56kb, Seismology 1201 N 1100 W Wbount, 60/QEDA/999631 [local] router(config-if)# ip address 155.99.238.34 255.255.255.252 [local] router(config-if)# no ip directed-broadcast router(config)# frame-relay map ip 155.99.238.33 16 broadcast [local] router(config)# no frame-relay inverse-arp router(config)# ip classless router(config)# ip route 0.0.0.0 0.0.0.0 155.99.238.33 [local] router(config)# line con 0 router(config-line)# exec-timeout 5 0 router(config-line)# password [local] router(config-line)# login router(config)# transport input none router(config)# line vty 0 4 router(config-line)# password [local] router(config-line)# login router(config)# end

Return to Building Installation.

University of Utah Seismograph Stations «» 135 South 1460 East, Room 705 WBB
Salt Lake City, Utah 84112-0111 «» Phone 801-581-6274 «» Fax 801-585-5585