Local Area Network Installation |
|
||
|
|
|
||
|
Above is a diagram of the connection of the K2 to the local area network. The terminal server is connected to the RS-232 output of the K2. The terminal server is connected with a Cat V ethernet cable to the local area network 10/100 base t port. The commands needed and command options are provided below. Commands followed by [local] are options which must be provided by end user. |
|||
Lantronix MSS-100 |
|||
|
Local_1>set priv Password>system Local_1>> change ipaddress [local] Local_1>> change gateway [local] Local_1>> change subnet mask 255.255.255.0 Local_1>> change privpass [local] Local_1>> change name "[local]" (station id recommended) Local_1>> change autobaud disabled Local_1>> change bootp disabled Local_1>> change dhcp disabled
|
Local_1>> change domain [local] (optional) Local_1>> change dsrlogout enabled Local_1>> change flow control ctsrts Local_1>> change inactive logout enabled Local_1>> change inactive timer 10 Local_1>> change netware disabled Local_1>> change access remote Local_1>> change rarp disabled Local_1>> change speed 19200 |
||
.gif)
